glazier salary in Bakersfield, CA

Pay data not published for glaziers in Bakersfield.

Worker installing a window frame with a power drill

BLS did not publish pay data for this combination

The Bureau of Labor Statistics does not publish figures for some trade and city combinations, often when the sample is too small. This applies to glaziers in Bakersfield.

Worker-submitted rates appear below when available.

Glaziers pay trend in Bakersfield, 2015 to 2025

The BLS did not publish a May 2025 figure for this combination. Earlier published years are shown.

-2.4% since May 2015

$15$20$2520152016May 2016: n/a2017May 2017: n/a2018May 2018: n/a2019202020212022May 2022: n/a2023May 2023: n/a2024May 2024: n/a2025May 2025: n/a$22.65May 2015: $22.65/hr median, BLS OEWS May 2025$22.01May 2019: $22.01/hr median, BLS OEWS May 2025$19.47May 2020: $19.47/hr median, BLS OEWS May 2025$22.10May 2021: $22.10/hr median, BLS OEWS May 2025

Dashed markers are years BLS didn’t publish this combination. Shown as gaps, never interpolated.

How to become a glazier in California

In FY2024, California had 673 active glazier apprentices (the most of any jurisdiction) out of 1,826 nationwide, according to the U.S. Department of Labor’s Registered Apprenticeship database. A registered apprenticeship is one paid route into the trade: on-the-job training combined with classroom instruction.

Active glazier apprentices in California (statewide, FY2024)

673

1,826 nationwide · California ranks #1 of 38 jurisdictions

Jurisdictions with the most active glazier apprentices, FY2024, top 10

  1. 01California673
  2. 02Hawaii111
  3. 03Michigan99
  4. 04Texas96
  5. 05Pennsylvania93
  6. 06Colorado91
  7. 07New Jersey89
  8. 08Nevada80
  9. 09Indiana69
  10. 10Minnesota60

Glazier apprenticeship training

A registered glazier apprenticeship combines paid work with classroom instruction. Employers, unions, and trade associations run programs registered with the U.S. Department of Labor or a state apprenticeship agency.

  1. Paid work

    Learn the trade on the job. Apprentice wages rise as skills develop.

  2. Classroom training

    Study alongside supervised work. Programs typically last several years.

  3. License requirements

    In licensed trades such as electrical and plumbing, apprenticeship hours usually count toward the state license. Requirements depend on the trade and state.

Search open programs at Apprenticeship.gov, the Department of Labor’s apprenticeship site.

Apprenticeship data sources and occupation titles

Active apprentice counts from the DOL Registered Apprenticeship, FY2024 database (RAPIDS): distinct apprentices by apprentice state (DOL defines this as the apprentice’s location; records from state apprenticeship agencies use the program’s state). Figures are statewide and are the same on every city page in the state. Occupation was not reported for 34.0% of active apprentices, so trade-level counts understate the true pipeline. DOL occupation titles counted: “GLAZIER”. U.S. Department of Labor dataset.

Union vs nonunion pay for glaziers

Full-time union members in this occupation group have median weekly earnings of $1,561, versus $1,004 for nonunion workers: a 55.5% union wage premium, or about $557 more per week. The Bureau of Labor Statistics cautions that these comparisons do not account for age, firm size, industry, or geography. These are the official national figures.

Union wage premium, 2025 (est. from national medians)

+55.5%

$1,561/week union vs $1,004/week nonunion (across all workers: +19.6%)

Median weekly earnings, full-time workers, 2025

Union members$1,561/wk
Nonunion$1,004/wk

Union wage premium by trade, ranked

  1. 01Electricians+55.5%
  2. 02Plumbers, Pipefitters & Steamfitters+55.5%
  3. 03Carpenters+55.5%
  4. 04Painters (Construction & Maintenance)+55.5%
  5. 05Roofers+55.5%
  6. 06Structural Iron and Steel Workers+55.5%
  7. 07Sheet Metal Workers+55.5%
  8. 08Brickmasons and Blockmasons+55.5%
  9. 09Glaziers+55.5%
  10. 10Heavy Equipment Operators+55.5%
  11. 11Insulation Workers+55.5%
  12. 12Landscaping & Groundskeeping Workers+52.0%
  13. 13HVAC Technicians+37.8%
  14. 14Automotive Service Technicians+37.8%
  15. 15Maintenance & Repair Workers+37.8%
  16. 16Welders+22.9%

Median usual weekly earnings from the 2025 BLS Current Population Survey, union membership annual release (Table 4): full-time wage and salary workers, sole or principal job. BLS publishes union-earnings figures for the broader group “Construction and extraction occupations”; these premiums are national. All self-employed workers are excluded. 2025 is an 11-month average (October not collected during the federal shutdown).

Related trades

Related trades to compare

Entry difficulty: Job Zone 2: very little to some preparation needed.

O*NET lists these occupations as related to glaziers, ranked by national median pay. Each link shows the same Bakersfield page for that trade.

Related occupations and Job Zones: O*NET 31.0 Database, U.S. Department of Labor.

Pay by industry

Where glaziers earn the most

Top 8 of 23 published industries by national median hourly pay. These are national figures, not Bakersfield pay.

Furniture and Related Product Manufacturing$49.41/hr
Local Government, excluding Schools and Hospitals (OEWS Designation)$45.73/hr
Wholesale Trade Agents and Brokers$39.41/hr
Elementary and Secondary Schools$36.03/hr
Management of Companies and Enterprises$31.71/hr
Merchant Wholesalers, Durable Goods$31.00/hr
Independent Artists, Writers, and Performers$29.94/hr
Foundation, Structure, and Building Exterior Contractors$28.20/hr

Industry pay: BLS OEWS, May 2025. Industries with suppressed BLS figures are not listed.

Glaziers: compare two cities

Pick any two cities to compare glaziers pay side by side: nominal medians, the middle-50% spread, and cost-of-living adjusted figures.

Published wage ranges by city

Hourly pay. Orange marks the median. Shading shows the middle 50%.

Bakersfield, CAData not publishedMedian
10th percentile
Data not published
25th percentile
Data not published
75th percentile
Data not published
90th percentile
Data not published
New York, NY$33.40/hrMedian
10th percentile
$21.09/hr
25th percentile
$27.69/hr
75th percentile
$38.62/hr
90th percentile
$53.28/hr

BLS OEWS May 2025 · Data updated October 2026

Moving to New York for work as a glazier?

Compare free quotes from licensed movers.

Get moving quotes

Sponsored link

Openings

Find glaziers jobs in Bakersfield

Job boards carry current openings with posted pay. Use the BLS figures above to judge whether an offer is fair.

Search jobs

Worker pay reports: glaziers in Bakersfield

Checking for worker-submitted rates…

Get monthly trade salary news

One email a month: sector hiring changes, published wage updates, and one featured city. Unsubscribe anytime.

Glaziers pay questions

Where does Trade Salaries get its pay data?

From the U.S. Bureau of Labor Statistics' Occupational Employment and Wage Statistics, May 2025 release: an employer survey covering millions of workers. Worker-submitted figures come from tradespeople who anonymously shared their pay on this site.

What is the difference between median and mean pay?

The median is the middle of the pay scale: half of glaziers in Bakersfield earn more, half earn less. The mean is the arithmetic average, which a few very high earners can pull upward. When comparing job offers, the median is the more useful number.

What do pay percentiles (p10, p25, p75, p90) mean?

They mark points on the pay scale. Ten percent of workers earn less than p10. A quarter earn less than p25 and a quarter earn more than p75. Ten percent earn more than p90. The p25 to p75 range covers the middle half of workers.

Has glaziers pay in Bakersfield changed since last year?

The BLS has not published figures for both years for this trade and city combination, so no year-over-year change is shown.

What is a location quotient?

The BLS did not publish a location quotient for this trade and city combination. Location quotients measure how concentrated a trade is locally: above 1.0 means over-represented versus the US average, below 1.0 means under-represented.

How are hourly and annual pay figures related?

BLS annual figures assume full-time, year-round work: 40 hours a week times 52 weeks, or 2,080 hours. The annual number is the hourly rate multiplied by 2,080. Overtime, bonuses, and unpaid time off are not included, so actual take-home pay varies with hours worked.

How current is the pay data?

The official figures are from BLS OEWS May 2025, the latest full release. The BLS publishes new wage data once a year, usually the following spring. Worker-submitted rates update continuously as people add them, and reflect current conditions more quickly than the annual survey.

How do I submit my pay anonymously?

Use the Add your rate form. It takes about 30 seconds and asks for no name, email, or account. Your trade, city, experience, and pay are all you enter. Submissions are reviewed before they appear publicly on the matching rate pages.

How do I become a glazier in California?

Through a registered apprenticeship: paid on-the-job training plus classroom instruction, typically lasting several years, with wages that rise as you learn. California had 673 active glazier apprentices in FY2024, the most of any jurisdiction (DOL). Search open programs at Apprenticeship.gov.

Do union glaziers earn more?

Yes. In 2025, full-time union members in construction and extraction occupations earned a median of $1,561 a week versus $1,004 for nonunion workers, a +55.5% premium. These are national BLS figures; union contracts often add better benefits and overtime rules the wage figures don't capture.

How does Bakersfield compare nationally? See the 2026 state of trade pay report: fastest-growing wages, biggest city pay premiums, and union gaps, computed from official BLS data.